Skip to content
Serving Livermore and nearby cities Mon–Fri: 8 AM–8 PM · Requests accepted 24/7 · (650) 203-2763

Furnace Repair in Pleasanton, CA

Serving Pleasanton and nearby cities. Tell us about the job and we’ll call you back to confirm the details.

Tell us what’s going on

Prefer to talk? (650) 203-2763

The short answer

TotalFlow HVAC Repair Service repairs gas furnaces in Pleasanton homes and finds the actual cause of problems like cold air, short cycling, and ignition failures before replacing any parts. Bay Area rules don't force you to replace a working furnace. Gas furnaces manufactured from 2029 must be zero-NOx, though, so that date matters if your unit is near the end of its life.

When your furnace quits on a cold night, you want someone who can show up, find the actual problem, and explain it in plain terms. TotalFlow HVAC Repair Service repairs furnaces in homes across Pleasanton, whether the unit sits in the garage, the attic, or a hall closet. We're based in Livermore, about 5 miles east, so Pleasanton is a short drive for us. This page covers the furnace problems we see most often, what happens during a repair visit, and how the Bay Area's furnace rules affect the choice between repairing and replacing.

Common Furnace Problems We Fix in Pleasanton Homes

Most furnace calls come down to a handful of causes. Some are quick fixes, and others point to a worn-out part. We test components before replacing anything, so you don't pay for parts that weren't the problem.

Many issues start with a clogged air filter, which restricts airflow and can make the furnace overheat and shut itself off. If you haven't changed the filter in a while, that's a good first check.

  • Furnace runs but blows cool air, often from a failed igniter, a dirty flame sensor, or a gas valve problem
  • Burners light and then shut off after a few seconds, a common sign of a dirty flame sensor or a venting issue
  • Blower won't start or runs nonstop, usually tied to a capacitor, motor, control board, or thermostat wiring
  • Short cycling, where the furnace turns on and off frequently
  • Banging, squealing, or rattling from the cabinet or ductwork
  • Error codes flashing on the control board
  • Some rooms stay warm while others stay cold

What Happens During a Repair Visit

We start by asking what you've noticed: when the problem started, any sounds or smells, and whether it happens all the time or comes and goes. Then we check the thermostat, filter, power, and gas supply before we open the cabinet.

Inside, we test the ignition sequence, flame sensor, pressure switches, limit switches, blower motor, and control board. We also inspect the heat exchanger and venting for cracks, corrosion, or blockages. Once we find the cause, we explain what failed, what the repair involves, and your options before any work starts. If a part has to be ordered, we tell you up front.

Repair or Replace? What the Bay Area Furnace Rule Means

If your furnace still works or can reasonably be fixed, you don't have to replace it. The Bay Area Air District's appliance rules don't require anyone to remove working equipment. They only apply when a furnace fails or is replaced.

That changes later this decade. Under Air District Rule 9-4, natural gas furnaces manufactured from 2029 on must meet a zero-NOx emission standard. In practice, that steers homeowners toward heat pumps when they replace a furnace after that date. If your furnace is older and needs a major repair, such as a heat exchanger or control board, think about whether to fix it now or start planning for a heat pump. We'll give you a straight read on the condition of your system.

About incentives: the federal 25C tax credit covered qualifying heat pumps placed in service before December 31, 2025, so it isn't available for new installations. You can check BayREN and your local clean energy provider for current heat pump incentives. Amounts and availability change by funding cycle, so we confirm the current offer before we quote it.

When a Furnace Problem Can't Wait

If you smell gas, leave the house and call your gas utility or 911 from outside. Don't flip switches or try to relight the furnace.

Schedule service soon if you notice any of these:

  • Your carbon monoxide alarm sounds (get everyone outside first)
  • A yellow or flickering burner flame instead of a steady blue one
  • Soot around the furnace or the supply registers
  • A burning or electrical smell that lingers after the first run of the season
  • Water pooling around a high-efficiency furnace

Serving Pleasanton and Nearby Communities

We repair furnaces in homes throughout Pleasanton, including ZIP codes 94566 and 94588. We also serve nearby Dublin, San Ramon, Danville, Union City, and Fremont.

Before you call, find the brand and model number on the label inside the furnace cabinet door, check the filter, and make sure the thermostat is set to heat. Sometimes that solves the problem. If it doesn't, the information gives our technician a head start.

More services in Pleasanton

Related

What to expect

How a visit goes

  1. Find the cause first

    We test and inspect before recommending parts or equipment, so the fix matches the actual problem instead of a guess.

  2. Clear options, no pressure

    When a system could be repaired or replaced, we lay out both paths and the tradeoffs, then let you decide what fits your home.

  3. Current information on rules and incentives

    Air District rules and rebate programs change. We confirm what applies today before we talk about it, so you can plan with accurate information.

FAQ

Common questions

Do I have to replace my gas furnace because of the new Bay Area rules?

No. The Air District's appliance rules don't require replacing working equipment. They apply only when a furnace fails or is replaced. Gas furnaces manufactured from 2029 on must meet a zero-NOx standard, which points most replacements after that date toward heat pumps.

Why is my furnace blowing cold air?

Common causes include a failed igniter, a dirty flame sensor, a gas supply or gas valve problem, or a thermostat set to 'fan on' instead of 'auto.' Check the thermostat first. If that isn't the issue, a technician can test the ignition sequence to find the cause.

Should I repair or replace an older furnace?

It depends on the furnace's age, overall condition, and the part that failed. A worn igniter or capacitor is usually worth fixing. A cracked heat exchanger on an older unit is a different conversation. We'll explain your options, including what the 2029 rule means for a future replacement.

Is there still a federal tax credit for heat pumps?

No. The federal 25C credit covered qualifying heat pumps placed in service before December 31, 2025, and it isn't available for new installations. Check BayREN and your local clean energy provider for current incentives. We confirm current offers before quoting them.

What should I do if I smell gas near my furnace?

Leave the house right away and call your gas utility or 911 from outside. Don't use light switches or try to relight the furnace. Once the utility has made the home safe, we can diagnose and repair the furnace.

Do you serve areas near Pleasanton?

Yes. Along with Pleasanton ZIP codes 94566 and 94588, we serve Dublin, San Ramon, Danville, Union City, and Fremont from our base in Livermore.

Need Heating or Cooling Help in Livermore?

Tell us what your system is doing, or not doing, and we'll schedule a visit to find the cause and walk you through your options.

(650) 203-2763
Call (650) 203-2763 Request Service